Skip to main content

Vivo V11 Pro Specifications

By

The all new VIVO has unveiled latest device to their mid range V series - V11 Pro. V11 comes with a notch display and has a hude 6.4 inch AMOLED with an aspect ratio of 19:5:9. The smaller notch gives as much display size without interference. The device got a 4th generation fingerprint sensor which is itself in the display. The V11 Pro has Snapdragon 660 chipset and 6GB RAM and 64GB on board storage expandable up to 256GB of storage. It runs on VIVO's funtouch OS powered by Android 8.1 Oreo. The VIVO is introducing JOVI AI Assistant on the new V11 Pro which is suitable to understand patterns. 
The V11 pro has a 12MP+5MP rear camera and a 25MP selfie camera for quality selfies. The device got n IR based face recognition system. The battery capacity is upto 3400mah with fast charging. The color varients available are Gradient blue and Gradient Gold with price range 25,990. 

Similar price range phones are :

 1. Apple Iphone 6 - 25,999 
      

     with 64GB memory
     4.7 inch display
     8MP rear camera
     1.2MP front camera
     
2. VIVO V9 Saphire blue - 25,500

       with 4 GB RAM | 64 GB ROM | Expandable Upto 256 GB
  •     6.3 inch Full HD+ Display
  •     16MP + 5MP Dual Rear Camera | 24MP Front Camera
  •     3260 mAh Li-ion Battery
  •     Qualcomm Snapdragon 626 Processor

3. NOKIA 7 PLUS White and Copper - 27,599

  •     4 GB RAM | 64 GB ROM |
  •     6 inch Display
  •     13MP Rear Camera
  •     3800 mAh Battery

4. OPPO F9 Pro - Sun rise Red - 25,989

     6 GB RAM | 64 GB ROM | Expandable Upto 256 GB
     6.3 inch Full HD
     Display 16MP + 2MP Dual Rear Camera 
     25MP Front Camera
     3500 mAh Li-polymer Battery
     Mediatek Helio P60 Octacore 2.0 GHz Processor
     Flash Charge with VOOC
     Drop Notch Full View Display


Comments

Post a Comment

Popular posts from this blog

Machining Processes & Machine Tool operations MCQ Mechanical

By
1. The cutting edge of the tool is perpendicular to the direction of tool travel in                                   A. Orthogonal cutting of metals  B. Oblique cutting of metals C. Both a and b D. None of these Ans: Orthogonal cutting of metals 2. The cutting edge of the tool is inclined at an angle less than 90 to the direction of tool travel in A. Orthogonal cutting of metals B. Oblique cutting of metals C. Both a and b D. None of these Ans: Oblique cutting of metals 3. Two components of the cutting forces which are perpendicular acting on the cutting tool in A. Orthogonal cutting of metals B. Oblique cutting of metals C. Both a and b D. None of these Ans: Orthogonal cutting of metals 4. Orthogonal cutting systems are also known as A. One dimesional cutting system B. Two dimensional cutting system C. Three dimensional cutting system D. none of ...
3 comments
Read more

What is moment of inertia?

By
Hi all, welcome to my blog. Today lets discuss about the topic moment of inertia. Every one of you may have heard about moment of inertia but only through mathematical terms.  Lets check the name again, "Moment of inertia" Split it in to two "Moment" of "inertia" Lets see, what is inertia Check the image above Lets consider they are in a race, in most conditions the probability of the thin guy winning is more. Why is the fat boy is slow? Because of his mass right? His mass is opposing his speed, thin guy has also a mass but th opposition is very low. In the same way inertia is an opposing virtual force. Now lets check the word moment, check the fishing rod, a force is applied at both the ends, and the rod bends. This is called moment, the turning force. Both force are in downward direction and the rod bends. I think the idea is clear, Moment of inertia means resistance to the turning force. Moment of inertia may change according to selection of forces, if ...
Post a Comment
Read more

Safety Operating Procedures required in an LPG plant

By
https://anurageros.blogspot.in/2017/09/safety-operating-procedures-required-in.html STANDARD OPERATING PROCEDURES : LEAK DETECTOR (VL/BL DETECTION) 1.        DRAIN OUT THE WATER FROM THE AIRLINE . BLOW OUT DIRT AND WATER FROM THE FILTER REGULATOR UNIT OF LD-01. CLEAN ALL THE PHOTO DIFFUSIVE SENSORS OF LD-01 2.        RESET LD-01 BY PRESSING THE (.) DOT BUTTON ON THE TOP RIGHT CORNER OF HMI AND WAIT TILL ‘CUC IN PROCESS MODE’ DISPLAYS. PRESS START BUTTON 3.        PUT VL TEST CYLINDER ON THE CONVEYOR. 4.        CHECK WHETHER THE UNIT IS REJECTING IT OR NOT. IF THE CYLINDER IS NOT GETTING REJECTED ADJUST THE SENSITIVITY SO THAT VL CYLINDERS OF LEAKAGE ABOVE 0.5GM/HR ARE REJECTED. 5.        CARRY OUT THE CHECK EVERY TWO HOURS AND RECORD IT. STANDARD OPERATING PROCEDURES : LEAK DETECTOR (O RING LEAK DETECTION) 1. ...
1 comment
Read more